Grading Slope Solver

Unitsdisplay & typing
Standard
🔒 Runs in your browser
Theme
1Pick a grading solver2Turn the ring to the values you know3Type their values4Check them against a standard5Type the values into Revit

Turn the ring to pick the values you know, or click a tag in the drawing to lock or unlock it. Shallow slopes are drawn with vertical exaggeration so you can see them; every value shown is true. Not a construction drawing.

Values

Standards

Grading standards

The limits every solver checks against. Pick one here or in the toolbar, or type your own authority’s values in the last column.

Limits are summarised from the published documents for quick checking: 2010 ADA Standards for Accessible Design, IBC 2021, Approved Document M (England) and BS 8300-1. A dash means the standard sets no limit there, so typical practice is used and labelled “Typical practice”. Always confirm against the current edition and your authority’s requirements. This tool is not a substitute for a code review.

Library

Grading formula library

The maths behind grading, drainage and earthworks, written in Revit formula syntax for parametric families. It reads like plain maths, so it works as a quick reference too.

Reference

Slope table & functions

The same slope written every way, and what the Revit formula editor understands.

Author

About the author